news

What details should be paid attention to when purchasing glass edging machine?

Posted by: Hongda    Time:12/7/2022 2:04:37 PM

As a necessary machine for glass deep processing, glass edging machine is relatively large in appearance, so the price of glass edging machine is also relatively high. Now, the editor wants to share with you the details of the selection and purchase of the glass edging machine, where to start to observe and check whether the quality of the glass edging machine is reliable.

First, let's review the basic structure of the glass edging machine. The main engine, water inlet and outlet guide rail, glass bracket and floor water tank are the basic components. The main machine can be divided into front beam, rear beam, base, column, motor, electric box and grinding wheel water tank.

In this way, you can clearly know where to start the quality inspection of the glass edging machine before purchase. The quality requirements of the standard require that the front and rear crossbeams must be flat and have wear resistance, heat resistance and oxidation resistance, so that the glass edging machine will not deform when operating at high temperature. Moreover, as the load-bearing position of the glass edging machine, the base needs to have the same performance as the front and rear beams to ensure the quality of glass edging. At the same time, the edging machine has a high requirement on the grinding head. The quality of the grinding head directly affects the quality of the glass after deep processing.

From many years of maintenance experience, it is necessary to pay special attention to all parts when purchasing the glass edging machine, especially the parts with high requirements for wear resistance and oxygen resistance, which need to be castings, and the weldments need to be particularly rigid, in order to ensure that the edging machine has no major faults, parts separation, looseness, etc. in the long-term use process.



Finally, you need to pay special attention to the motor. The motor shaft has high run-out accuracy and strong waterproof ability, which can better ensure the quality of glass deep processing. The thickness of the motor grinding plate of the glass edging machine and the quality of the motor itself are both binding. The cost of thick grinding plate is much higher than that of thin plate, so pay attention to inspection. It is recommended to buy the motor made of copper wire, with better bearing and high waterproof performance.


Copyright ©2022 Guangdong Hongda Intelligent Technology Co., Ltd.
All rights reserved

粤ICP备16087256号 Design by:ceall.net.cn